Overview Of The Barcode Area Definition Software; Installing The Barcode Area Definition Software - Riso ComColor FT Series User Manual

Chapter 7 Using the Barcode Area Definition Software
7

Overview of the Barcode Area Definition Software

Installing the Barcode
Area Definition Software
You need to install the Barcode Area Definition
Software before using it for the first time.
Operating Environment
^ ^
The system requirements for activating the
Barcode Area Definition Software are described in
the table below.
Memory
CPU
Hard disk
Display
Installing
^ ^
• Log in as a user with administrator privilege.
^ ^
• Close all active applications.
1
Load the included DVD-ROM in the
computer's DVD-ROM drive.
2
Open the [Utility] -
[BarcodeAreaDefinitionSoftware]
folder on the DVD-ROM, and double-
click the "setup.exe" file.
3
Select the desired language in the
pull-down menu and click [OK].
158
Barcode Area Definition Software
1 GB or more
Intel or fully compatible CPU
2 GB or more free space
(Space enough to operate the
OS)
1024 × 768 or greater resolution
4
Click [Next].
5
Select [I accept the terms in the
license agreement] and click [Next].
6
Follow the on-screen instructions to
configure the settings.
^ ^
• When installation is complete, a
"Readme" screen is displayed. The
"Readme" screen includes precautions for
using the machine. Be sure to read this
information.
7
Remove the DVD-ROM from the
computer.
• Keep the DVD-ROM in a safe place for future
^ ^
reference.
Uninstalling

1
Click [Start] - [Settings] - [Apps] -
[Barcode Area Definition Software] -
[Uninstall].
2
Follow the on-screen instructions to
uninstall the Barcode Area
Definition Software.
3
After the Barcode Area Definition
Software has been uninstalled,
restart the computer.
ComColor FT Series User's Guide