Riso ComColor FT Series User Manual page 108

Chapter 3 Printing
[Larger Page]
[Long Edge], [Short Edge]
[Smaller Page]
[Long Edge], [Short Edge]
[Rotate Larger Page 180 Degrees]
Select the [Rotate Larger Page 180 Degrees]
check box to rotate the larger pages 180 degrees.
• [Larger Page] means A3, B4 (Ledger, Legal),
^ ^
and Tabloid; [Smaller Page] means other
sizes.
• Some applications do not allow you to rotate
the larger pages to the desired orientation. In
this case, select the check box to rotate the
print orientation 180 degrees.
Zoom
^ ^
Specify the enlarge/reduce ratio of the original.
Select the [Zoom] check box and enter the
enlarge/reduce ratio in the range of 50% to 200%.
If you do not select [Zoom], the enlarge/reduce
ratio is automatically selected based on the
[Original Size] and [Paper Size] settings.
Paper Size
^ ^
Specify the size of paper for printing.
• When printing on envelopes, it is
^ ^
recommended that you connect the optional
stacking tray and envelope feeder.
• The list shows the sizes registered in [Custom
Paper Entry] in the [Environment] tab. (p.122
"Custom Paper Entry")
Specifying a Custom Paper Size

When the paper is a non-standard size, select
[Custom].
1
Select [Custom] for [Paper Size].
The [Custom] dialog box is displayed.
2
Enter the size of the paper.
3
Click [OK].
106
• The size entered here is only valid when
^ ^
configuring the document size.
Registering frequently-used paper sizes can
be useful. (p.122 "Custom Paper Entry")
Paper Tray
^ ^
Specify the input tray to use for printing.
[Auto]
The paper tray is selected automatically according
to the [Paper Type] and [Paper Size] settings.
[Feed Tray 1], [Feed Tray 2], [Additional Tray]
The paper loaded in the specified tray is used for
printing.
[Standard Tray]
The paper loaded in the standard tray is used for
printing.
• If [Auto] is selected, but the actual paper
^ ^
loaded in the tray does not match the [Paper
Size] and [Paper Type] settings (or the same
paper is loaded but the tray selection setting is
not set to [Auto Selection]), an error occurs
and the job is not printed. Select [Any] in
[Paper Type]. (p.106 "Paper Type")
• You can use the RISO Console to confirm the
paper size and paper type loaded in the printer
paper tray. See "[Consumables] Screen"
(p.149) in "RISO Console".
• [Additional Tray] is displayed when the
optional additional tray is connected.
Paper Type
^ ^
Select the type of printing paper.
You can print the document data with adjustments,
such as coloration and amount of ink, and image
processing that suit the selected paper type.
[Any]
Select this option to enable automatic selection of
paper type according to printer settings.
[Plain]
[Plain (premium)]
[IJ Paper], [Matt Coated]
Select one of these when using IJ paper or similar
paper.
ComColor FT Series User's Guide