Maintenance Mode Settings - Riso ComColor FT Series User Manual

Chapter 8 Optional Equipment
[Auto]
The appropriate tray is selected automatically.
[A A Face Down Tray], [BWide Stacking Tray]
Select the output tray.
1
Touch [Output Tray].
2
Select the output tray.
3
Touch [OK].
^ ^ Face Up/Down
Select whether to output printouts face up or face
down to the tray.
[Face Up], [Face Down]
Output Tray Relay
^ ^
The output tray switches automatically when the
tray that is being used becomes full.
1
Touch [Output Tray Relay].
2
Touch [ON].
3
Touch [OK].
• This setting is not available when using the
^ ^
wide stacking tray or face up stacking tray.
• When [Output Tray Relay] is configured, [Sort]
is set to [Uncollated]. (p.62 "Sort")
Maintenance Mode
Settings
^ ^ Paper Guide Control
Adjust the position of the paper guides of the auto-
control stacking tray. For more information, see the
separately provided "Troubleshooting Guide".
194
ComColor FT Series User's Guide