Add Cover - Riso ComColor Series User Manual

2 Copy
●
Deleting a Program
1
Display the [Program (1)] screen.
Follow Steps 1 and 2 in "Configuring the
Program".
2
Press [Save/Call].
The [Program list] screen is displayed.
3
Select the program to delete.
• You can also select multiple programs.
4
Press [Delete].
The message "Selected setting will be deleted.
Are you sure?" appears.
5
Press [Yes].
The program is deleted and the [Program list]
screen is displayed.
6
Press [Close].
The [Program (1)] screen is displayed.
7
Press [Cancel].
8
2-40

Add cover

Add preprinted sheets or colored paper that has
been loaded in the tray, to the front and back of the
printouts as covers.
■ Binding side
Select the binding side of the paper.
[Left], [Right], [Upper]
■ Front cover
[No]
[Yes]
A cover is added to the front of the printouts.
Select the feed tray to use.
■ Back cover
[No]
[Yes]
A cover is added to the back of the printouts.
Select the feed tray to use.
You cannot use paper of a different size from that
of the paper to be copied.
1
Press [Functions] on the copy
mode screen.
2
Press [Add cover].
The [Add cover] screen is displayed.
3
Select the binding side.
ComColor Series User's Guide 01