Riso ComColor FT Series User Manual page 87

^ ^
• If you select [Console], you do not need to
specify the destination. The scanned data
is saved to the internal hard disk of this
machine.
When you have selected [Mail]

You can attach the scanned data to e-mail
messages and send them.
1)
Touch [Address].
The [Address] screen is displayed.
2)
Select an address from [Mail
Address Book].
The selected address appears in [Selected].
• You can touch the index to narrow down the
list of addresses registered in the address
book.
3)
Touch [OK].
^ ^
• To send to an address that is not
displayed in [Mail Address Book], touch
[Direct Input] to register a new address.
• To remove an address from [Selected],
you can either clear all addresses by
touching [Clear All] or select the address
to remove and touch [Clear].
• Touch [Sender] to display the [Sender]
screen and enter the sender's name.
When you have selected [PC]

The scanned data is saved on a computer on the
network.
1)
Touch [Destination].
The [Destination] screen is displayed.
Overview of Scan Operations
2)
Select a destination from [PC
Address Book].
The selected destination appears in [Selected].
• You can touch the index to narrow down the
list of destinations registered in the address
book.
3)
Touch [OK].
^ ^
• To save data to a computer not listed in
[PC Address Book], contact your
administrator.
• Touch [Direct Input] to register a new
destination. For more information on the
destination server, contact your
administrator.
4
Change the settings.
Specify the detailed settings for scanning.
For more information on the functions that can be
configured, see "List of Settings" (p.87).
5
Check the preview display.
1)
Touch [Check Setting].
The [Check Setting] screen is displayed.
ComColor FT Series User's Guide
2
85