List Of Settings - Riso ComColor FT Series User Manual

List of Settings

The following is a list of settings available in Copy mode.
Setting item
Color Mode Select color or monochrome printing.
Reproduction Size Use this to reduce or enlarge the copied image.
Change the paper tray, paper type, and feed control settings according to the copying
Paper Selection
paper.
Scanning Size Specify the scanning size for originals.
Original
Specify the orientation of the original.
Orientation
Specify the sides of the original to be scanned and the sides of the paper to be printed
Duplex/Simplex
on.
Sort Specify the printing method for making multiple copies of the original.
Scanning Level Adjust the scanning level of originals.
Print Density Specify the print density.
ADF Scan & Use this option to copy as one job even when having to load the original in multiple
Pause sets due to the large number of pages in the original.
Mixed Size
Use this option when multiple different original sizes are used in the original.
Original
Book Shadow Use this option to remove shadows that appear in the center of copies when an open
Erasure book is copied.
Page Split Use this option to scan double-spread pages into two parts (right and left).
Combine Use this option to impose continuous pages onto one sheet.
Image Repeat This function imposes multiple copies of the same original onto one sheet.
Specify the imposition when creating a booklet. When the optional multifunction
Booklet
finisher is connected, creating the booklets with saddle stitch stapling is also available.
Stamp Use this option to print the page number, date, and text on the header or footer.
Page Border Use this option to add a border line in the margins of the paper.
Image Quality Specify the resolution for scanning originals.
Select the original type so that the appropriate image processing is performed before
Original Type
printing the scanned data.
Gamma
Use this option to adjust the color balance (CMYK) of the scanned data.
Correction
Image Control Specify the image processing of the original.
Base Color Level Make the background color (base color) lighter so that the text is easier to read.
Image Position Specify this when adjusting the print position.
Overlay Make copies upon layering an image that has been saved on the storage.
Specify this when the number of required copies varies by group (such as corporate
Program division or classes). You can quickly print exactly the number of copies of the number
of sets you need.
Add Cover Specify this to add front and back covers to the front and back of the printout.
Description
Overview of Copy Operations
See
p.59
p.59
p.59
p.61
p.61
p.62
p.62
p.62
p.63
p.63
p.63
p.64
p.64
p.65
p.66
p.66
p.66
p.68
p.68
p.69
p.69
p.69
p.70
p.70
p.70
p.72
p.74
ComColor FT Series User's Guide
1
57