Closing The Standard Tray - Riso ComColor FT Series User Manual

Adding or Switching Paper in
^ ^
the Standard Tray
Press the standard tray descent button when
loading additional sheets or when switching paper.
Note that the standard tray is automatically
lowered when all paper is removed.
1
Press the standard tray descent
button to lower the standard tray.
Hold the button down until the tray reaches the
desired position.
2
Load additional paper, or switch the
loaded paper.
Closing the Standard
Tray
^ ^
• Make sure that the power is on when you
perform this operation.
48
1
Remove the loaded paper.
The standard tray starts lowering.
2
Close the standard tray.
^ ^
• Make sure the standard tray is all the
way down before closing it.
ComColor FT Series User's Guide