Riso ComColor FT Series User Manual page 162

Chapter 7 Using the Barcode Area Definition Software
Menu bar
Area minor
adjustment tool
(X/Y/W/H)
Rotate
Display Units
Zoom
/ /
Thumbnail
Status Bar
Tool Bar
Tools
Hand Tool
Selection Tool
Creation Tool
Auto Area
Detection
More
Version
160
Function
Displays the coordinates (X/Y),
width (W), and height (H) of the
barcode area in the display unit
format (mm/inch). Enter a value
in the box to change the barcode
area to a specified position or
size.
(This is only displayed in the tool
bar.)
Rotates the on-screen print
image 90 degrees to the left or
right.
You can specify mm or inch as
the unit to use on the barcode
area definition page.
You can specify the magnification
ratio for the print image, fit the
full image on the page, fit the
image to the width of the page,
enlarge it, or reduce it.
Displays or hides the thumbnail.
Displays or hides the status bar.
Displays or hides the tool bar.
You can drag a print image to
change its display position.
You can select a barcode area.
Press and hold the Ctrl key to
select multiple barcode areas.
The selected area is indicated by
.
You can specify the barcode
area, where the print density is
adjusted to make the area
suitable for reading.
The enclosed area is indicated
by .
Automatically detects the
barcode area on all pages or
specified pages.
Displays the version information.
ComColor FT Series User's Guide