Riso ComColor FT Series User Manual page 32

Main Power Switch
J
Use this switch to turn on the power. Usually the
power is left ON.
Machine Socket
K
Connect the main unit power cable to this socket.
Paper Feed Guide Lever
L
Use this lever to slide or fix the standard tray paper
guide. Levers are located on both sides of the
standard tray paper guide, in two places.
Left Cover
M
Open this cover when there is a paper jam.
USB Port
N
Connect a USB flash drive to this port to save the
scanned data or to print the data saved on a USB
flash drive.
• You need to use the USB flash drives
^ ^
compatible with Mass Storage Class and
file system format (FAT16, FAT32, exFAT).
Operation Panel
O
Use to perform operations or settings. You can adjust
the angle so that it is easier to see.
30
ADF Original Unit Lever
P
Pull this lever up to open the ADF original unit cover
when documents are jammed.
Auto Document Feeder (ADF)
Q
Up to about 200 documents can be automatically fed.
ADF Original Guide
R
Slide to fit the width of the document.
S ADF Original Output Tray
Documents that are read from the ADF are output
here.
Front Cover
T
Normally the front cover is locked and cannot be
opened. This lock is automatically released when a
paper jam or other problems occur.
To open the front cover in other cases, go to
[Maintenance] from the [Home] screen and touch
[Front Cover Release].
Feed Tray 1, Feed Tray 2 (Feed Trays)
U
Load the paper to be used for printing here.
• Use the standard tray for thick paper and
^ ^
other special paper types.
Lower Right Cover
V
Open this cover when there is a paper jam.
Upper Right Cover
W
Open this cover when there is a paper jam.
Paper Alignment Lever
X
Use this lever to align the documents that are output.
If the lever interferes with output, pull it up and lock it.
ComColor FT Series User's Guide