Page Border; Image Quality - Riso ComColor FT Series User Manual

Chapter 1 Copying
6
Set the apply page option.
7
Set the date to be stamped.
To specify a date of your choice, touch [Specify
Date] and touch the input screen displayed on the
screen to set the date.
You can also enter the number using the numeric
keys.
8
Touch [OK].
Printing the Text
^ ^
1
Touch [Stamp].
The [Stamp] screen is displayed.
2
Touch [Text].
^ ^
• You cannot change the font.
3
Specify the position for printing
text.
^ ^
• Different type of stamps cannot be
stamped together in the same position.
4
Specify the text size.
Touch [ ] or [
[Text Size] screen. You can also enter the number
using the numeric keys.
5
Set the transparency option.
6
Set the apply page option.
7
Set the text to be stamped.
8
Touch [OK].

Page Border

This option adds a border line in the margins of the
paper.
68
] to specify the text size on the
• Even when this option is used with [Combine]
^ ^
or [Image Repeat], the border line is printed on
each copy paper, not per page of the original.
• The border lines are printed over the original
data. If there is an overlap of an image in the
border printing area, part of the image may not
be printed.
• When [Color Mode] is set to [Black], [Cyan], or
[Magenta], colors that are not selectable are
grayed out. (p.59 "Color Mode")
• Printing a border on black-and-white copies
can make posters and signs stand out.
• You cannot use [Page Border] with [Stamp] or
[Mixed Size Original]. (p.66 "Stamp", p.63
"Mixed Size Original")
[OFF], [Red], [Blue], [Green], [Yellow], [Black]
Border line width (manual entry)
1
Touch [Page Border].
The [Page Border] screen is displayed.
2
Select a border line color.
3
Touch [ ] or [
width of the border line.
You can also enter the number using the numeric
keys.
4
Touch [OK].

Image Quality

Specify the resolution for scanning originals.
[Standard]
Select this when the original has mostly text.
[Fine]
Select this when the original has photos. The
original is printed at a speed lower than when
selecting [Standard], but it is scanned with higher
resolution.
1
Touch [Image Quality].
The [Image Quality] screen is displayed.
2
Select a resolution.
3
Touch [OK].
] to specify the
ComColor FT Series User's Guide