Riso ComColor FT Series User Manual page 223

Dimensions When Operating (W × D × H)
*1 Within 10 minutes after the last print job
*2 When using plain paper and recycled paper (85 g/m (23-lb bond)), and standard density setting
Chart used: Print measurement pattern [Color measurement sample 2 (JEITA standard pattern J6)]
*3 The guaranteed area when printing images is the area enclosed within 5 mm (7/32") of the edges of the paper.
The margin when printing envelopes is 10 mm (3/8").
*4 Without printing and temperature adjustment operation
*5 One gigabyte (GB) is calculated as 1 billion bytes.
*6 The continuous print speed varies depending on the type of optional output equipment connected.
Face down finisher:
Without offset: 100 sheets/minute (A4 Simplex)
Offset output: 82 sheets/minute (A4 Simplex)
*7 When setting [Power Consumption (in sleep)] to [Low].
*8 When using duplex print: 340 mm × 460 mm (13 3/8" × 18 1/8")
*9 Duplex printing is not guaranteed with thick paper the weight of which is greater than 104 g/m .
*10 When using plain paper (64 g/m (17-lb bond))
RAL-UZ205 Noise Emissions while printing
Scanner HS7000 (Optional)

Copy Functions and Scan Functions
Type
Scanning Modes
Maximum Scanning Area
Writing Resolution
Copy Paper Size
First Copy Time
Copy Functions
Scanning Speed
Reproduction Size
Type
Original Size
Auto Document
Feeder (ADF)
Paper Weight
Original Capacity
With the front cover open and the operation panel in the upright
position:
1,185 mm × 1,225 mm × 1,115 mm (46 21/32" × 48 7/32" ×
43 29/32")
2
2
Flat Bed Scanner with Automatic Document Feeder (ADF)
Copy mode: Color, Monochrome, Auto, Cyan, Magenta
Scan mode: Color, Monochrome, Auto, Grayscale
303 mm × 432 mm (11 15/16" × 17") (when using platen glass)
295 mm × 430 mm (11 5/8" × 16 15/16") (when using ADF)
Standard: 300 dpi × 300 dpi
Fine: 300 dpi × 600 dpi
Maximum: 303 mm × 432 mm (11 15/16" × 17") (equivalent to A3)
Monochrome/Color: 7 sec or less (when copying A4-LEF/Letter-
LEF orientation using Color Priority Mode)
Simplex copying (A4-LEF/Letter-LEF, using ADF): 70 ppm or
higher
Duplex copying (A4-LEF/Letter-LEF, using ADF): 70 ppm or higher
50% to 200% (Copy mode)
Original source displacement (capable of scanning both sides of a
document by simultaneous duplex scanning)
Maximum: 297 mm × 432 mm (11 11/16" × 17")
Minimum: 100 mm × 148 mm (3 15/16" × 5 27/32")
2
52 g/m (14-lb bond) to 128 g/m (34-lb bond)
2
80 g/m (21-lb bond): Max. 200 sheets
Height up to 25 mm (1")
Specifications
2
2
ComColor FT Series User's Guide
9
221