Riso ComColor FT Series User Manual page 49

^ ^
• When printing on envelopes, it is
recommended that you connect the
optional stacking tray and envelope
feeder.
• Be sure to load envelopes with their flaps
open and their bottom side entering the
machine first.
• The [Rotation] feature is useful for printing
on envelopes from a computer.
4
Adjust the paper guides so that they
are suitable for the paper size.
Move the guides against the edges of the paper,
and push the lever to lock.
^ ^
• The machine detects the paper size at
the guide position. Be sure to move
the guide and stopper against the
edge of the paper.
• Do not place spare paper on the paper
size detection sensor when loading
A4, Letter, or A5 size paper. If the
sensor is blocked, the machine
cannot detect the paper size correctly.
5
Adjust the paper feed pressure
adjustment lever.
For general use, set to "
envelopes, drawing paper, postcards, and similar
products, set to " (CARD)".
6
On the operation panel, check the
tray settings.
When you have switched to a different type or size
of paper, update the feed tray settings. (p.59 "Paper
Selection")
Preparation
(NORMAL)". For
ComColor FT Series User's Guide
47