Riso ComColor FT Series User Manual page 99

2
Select a job.
Icon displayed on thumbnails
: Job with a PIN code
: Broken job (Broken data or data with problems)
None: All other jobs sent from computers
The following settings can be configured from the
sub menu.
• Select All / Deselect all
• Delete
• Change Setting
^ ^
• When a job name exceeds the character
limit, the part of the job name is omitted
and displayed as "...".
• In the following cases, the job name is
displayed as "*****".
- Jobs with the [Hide Job Name] check
box selected on the printer driver (p.119
"PIN Code")
3
Press the [Start] key.
The selected job is printed.
When printing a job with a PIN

code
The PIN code entry screen is displayed. Enter the
PIN code using the numeric keys, and touch
[Continue].
^ ^ Changing Settings During
Printing
1
Press the [Stop] key.
The [Suspending] screen is displayed.
2
Touch [Change Setting].
The [Change Setting] screen is displayed.
3
Change Settings.
You can change the following settings.
• Slow Printing (p.76 "Slow Printing")
• Print Density (p.63 "Print Density")
• Paper Selection (p.59 "Paper Selection")
• Image Position (p.70 "Image Position")
^ ^
• If you touch [Proof], only one copy of the
page that was being processed when the
[Stop] key is pressed is printed.
4
Touch [Close].
5
Touch [Continue].
Printing of the job with modified settings starts.
Performing Maintenance
^ ^
During Printing
1
Press the [Stop] key.
The [Suspending] screen is displayed.
2
Touch [Maintenance].
The [Maintenance] screen is displayed.
3
Change Settings.
You can change the following settings.
• Head Cleaning
• Paper Guide Control
• Online/Offline
• Front Cover Release
ComColor FT Series User's Guide
Overview of Print Operations
3
97