Sfp+ Link Panels (Tx/Rx/Trx Modes); Source Mux Selector - Lightware UBEX-PRO20-HDMI-F100 User Manual

 
     
6. Lightware Device Controller (LDC) 6. Lightware Device Controller (LDC)
6.5.11. SFP+ Link Panels (TX/RX/TRX Modes)
Clicking on the SFP+ Link 1 or 2 panel opens the properties of the SFP+ connections. The most important
signal information and the parameters of the SFP+ transceiver module or DAC cable are available on the
panel. #sfp

ATTENTION! If the icon appears that means incompatible optical transceiver module is installed to the

endpoint device (SFP optical module (1 GbE) instead of SFP+ module (10 GbE).
SFP+ Link 1 properties panel (TX)
series – Extender Application Mode – User's Manual series – Extender Application Mode – User's Manual
Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3
6.5.12. Source MUX Selector
The source multiplexer (Source MUX) makes available routing more different source signals to the HDMI
output ports. See more details about this function in the
#mux #sourcemux
Click on the MUX menu to expand the source MUX selector.

ATTENTION! The audio crosspoint settings always follow the source MUX settings of the video layer and
the MUX settings cannot be set in the audio layer.
Receiver (RX) Mode
HDMI Out 1
▪ Stream - The signal source of the output port is
the stream coming from the remote device.
▪ HDMI in 1 - The signal source of the output port is
the stream of the local input port of the receiver.
The HDMI in 1 port panel will be available when
selecting this option.
HDMI Out 2
▪ Stream - The signal source of
the output port is the stream
coming from the remote
device.
HDMI in 2- The signal source of
▪
the output port is the stream
of the local input port of the
receiver. The HDMI in 2 port panel will be available when selecting this option.
▪ Copy - The device is able to copy the signal of the HDMI out 1 port. This is the COPY function.

INFO: The Copy function is available only on the HDMI out 2 port.
TIPS AND TRICKS:
The source of the output port can be also selected without expanding the MUX menu.
Transceiver (TRX) Mode
HDMI Out 2
▪ HDMI in 2- The signal source of the local output
port is the stream of the input port of the
transceiver.
▪ Copy - The device is able to copy the signal of
the HDMI out 1 port. This is the COPY function.

TIPS AND TRICKS: The source of the output port can be also selected without expanding the MUX menu.
79 79
Receiver Mode and Transceiver Mode sections.