Transmitter Mode - F110 Model; Receiver Mode - F110 Model - Lightware UBEX-PRO20-HDMI-F100 User Manual

 
     
5. UBEX Concept 5. UBEX Concept
Connection with an F110 Endpoint Device
When the F100/R100 transceiver connects to an F110 endpoint device, the port diagram changes due to the
expanded audio possibilities.
The number of audio outputs expands to two due to the analog audio output port on the remote endpoint.
The crosspoint setting is available in the local transceiver as well.
5.2.4. Transmitter Mode - F110 Model
Port Diagram
The port diagram is valid for the following UBEX endpoint model:
▪ UBEX-PRO20-HDMI-F110
Audio port diagram of the F110 transmitter
Description
The device is built with a 4:1 digital audio switch which has four inputs: the de-embedded digital audio
streams of the HDMI in 1 and 2; the analog audio of the analog audio input port; and the return audio channel
received from remote endpoint device over the SFP+ ports. The selected audio stream can be switched to
the analog audio out port after a digital/analog conversion (D/A converter).
The audio streams of the HDMI in 1, HDMI in 2, and the analog audio in ports are transmitted via the SFP+
output ports toward the remote endpoint device.
The HDMI out 1 and 2 ports are local output ports, they transmit the audio streams of the HDMI in 1 and 2
ports directly.
series – Extender Application Mode – User's Manual series – Extender Application Mode – User's Manual
Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3
Signal Support of the Analog Audio Output
The UBEX-PRO20-HDMI-F110 endpoint model converts the uncompressed stereo audio stream to analog audio.
The analog audio output port supports PCM audio format up to 48 kHz.

ATTENTION! If unsupported audio signal is selected to the analog audio output, the port will be muted
automatically. The current status of the port can be queried by an LW3 protocol command, see the details
in the Query the Status of the Analog Audio Output
5.2.5. Receiver Mode - F110 Model
Port Diagram
The port diagram is valid for the following UBEX endpoint model:
▪ UBEX-PRO20-HDMI-F110
Port diagram of the F110 receiver
Description
The device is built with a 4x3 digital audio crosspoint which has four inputs: three digital audio streams are
received from the SFP+ links. The fourth input is the stream of the analog audio in port. The audio streams
can be selected to the HDMI out 1 and 2, and the analog audio out ports.
The stream of the analog audio in port is transmitted toward the remote endpoint device over the SFP+ links.
The HDMI input ports of the receiver operate as local HDMI inputs.
section.
61 61