Rear View - Lightware UBEX-PRO20-HDMI-F100 User Manual

 
     
2. Product Overview 2. Product Overview
2.1.2. Rear View
UBEX-PRO20-HDMI-F100
5 6
UBEX-PRO20-HDMI-F110
5 6
5 AC connector Standard IEC connector accepting 100-240 V, 50 or 60 Hz. See more details
about it in the
Ethernet Standard locking RJ45 connectors for 1 Gbps Ethernet connections to control
6
connectors the device, for user Ethernet access, and firmware update purpose. See the
details about the cable wiring in the
concept of the operation in the
7 HDMI input ports HDMI input ports with HDMI 2.0 support for the source devices. When the
device is configured as a receiver, the ports operate as local HDMI inputs.
The HDMI in 1 port cannot accept AV signal when the device is configured as
transceiver. See more details about the HDMI interface in the
section.
series – Extender Application Mode – User's Manual series – Extender Application Mode – User's Manual
7 8 9
q w e r
7 8 9
AC Power Connection section.
Ethernet Connectors section and the
Ethernet Control Interface section.
Video Interface
Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3
8 HDMI output ports HDMI output ports with HDMI 2.0 support for sink devices. When the device
is configured as transmitter, the both ports operate as local HDMI outputs.
When the device is configured as transceiver, the HDMI out 2 port operate as
local HDMI output. The HDMI out 2 port is able to copy the signal of the HDMI
in 1 port when the device is configured as receiver or transceiver. See more
details about the HDMI interface in the
SFP+ port slots Optical port slots for 2x 10 GbE SFP+ modules or 2x 10 GbE DAC cables. Ports
9
can be used for either singlemode or multimode fiber optical connections.
See more details about the SFP+ interface in the
q Analog audio input 5-pole Phoenix connector for balanced analog audio input. The port is
port available in all operation modes (TX/RX/TRX). See more details about the
pin assignment in the
about the cable wiring in the
interface in the Audio Interface
w Analog audio 5-pole Phoenix connector for balanced analog audio output. The port is
output port available in all operation modes (TX/RX/TRX). See more details about the
pin assignment in the
about the cable wiring in the
interface in the Audio Interface
Infrared 3-pole TRS connector, also known as 3.5 mm (1/8") jack plug for optional IR
e
connectors detector (IR IN) and emitter (IR OUT) connection. See more details about the
pin assignment in the
operation in the Infrared Interface
r RS-232 connector 3-pole Phoenix connector for serial communication. See more details about
the pin assignment in the
in the Serial Ports
Interface section.
Video Interface section.
SFP+ Interface section.
Symmetrical Analog Stereo Audio Connector
Audio Ports section, and about the analog audio
section.
Symmetrical Analog Stereo Audio Connector
Audio Ports section, and about the analog audio
section.
IR Connector section, and about the concept of the
section.
RS-232 Connector section, about the cable wiring
section, and the concept of the operation in the
18 18
section,
section,
Serial