Front And Rear View - R-Series Endpoint Devices; Front View - Lightware UBEX-PRO20-HDMI-F100 User Manual

 
     
2. Product Overview 2. Product Overview
2.2. Front and Rear View - R-series Endpoint Devices
2.2.1. Front View
All Models
1
1 Mounting ears Durable mounting ears on both sides of the device for the easy mounting in
the case of rental or staging application. The ears serve more purposes, see
the details in the
Status LEDs The LEDs give immediate feedback about the current status of the endpoint
2
device. See the details about the operation of the LEDs in the
section (on the right side).
3 LCD screen LCD screen showing the most important settings and parameters in the front
panel menu. The available settings and information depends on the current
application mode. See the details in the
chapter.
4 Jog dial control Easy setting and menu navigation by the jog dial control. Keep dialing and
knob click while getting feedback on the LCD.
The operation of the jog dial control knob can be disabled by the control lock
feature. The function can be enabled by the following methods:
Lightware Device Controller (LDC) software - see the details in the
▪
Panel Tab
▪ LW3 protocol command - see the details in the
Reset button Reboots the device (the same as disconnecting from the power source and
5
reconnecting again).
series – Extender Application Mode – User's Manual series – Extender Application Mode – User's Manual
2 3 4 5
Mounting Options - R-series Endpoint Devices section.
Status LEDs
Front Panel LCD Menu Operations
section;
Control Lock section.
Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3
Status LEDs
LIVE
blinking The device is powered and ready to use.
off The device is not powered or out of operation.
STATUS
on All measured temperature and voltage values are within the limits.
blinking Measured temperature or voltage value is out of the limits.
1
off The device is not powered or out of operation.
LINK OK
The connection is established on the fiber optical links and the Link Aggregation is
on
working.
The connection is established on the fiber optical links and LACP detection period is
blinking
active.
off No connection is established on one of the fiber optical links.
MMU AVAILABLE
Matrix mode is active; the communication is live between the endpoint and the Matrix
on
Management Unit (MMU).
blinking Matrix mode is active; no communication between the endpoint and the MMU.
off Extender mode is active; no communication between the endpoint and the MMU.
Dark Mode
Rental application requires this function, which keeps the LCD screen and the LEDs unlit to hide the device
during the event. The function can be enabled by the following methods:
▪ Front panel LCD menu - see the details in the
▪ Lightware Device Controller (LDC) software / Built-in website - see the details in the
Front
▪ LW3 protocol command - see the details in the
Transmitter / Receiver / Transceiver
Transmitter / Receiver / Transceiver
Transmitter / Receiver / Transceiver
Transmitter / Receiver / Transceiver
Front Panel section;
Front Panel Tab
Dark Mode Setting section.
19 19
section;