Scaler Panel - Input Side (Tx Mode); Frc - Input Side (Tx/Trx Modes) - Lightware UBEX-PRO20-HDMI-F100 User Manual

 
     
6. Lightware Device Controller (LDC) 6. Lightware Device Controller (LDC)
6.5.3. Scaler Panel - Input Side (TX Mode)
Clicking on the Scaler panel on the HDMI input 1 of the transmitter opens the Scaler properties. This feature
allows to rescale the incoming stream to other resolution and refresh rate and fit to the sink device.
#csc #colorspace #colorrange
The most important signal and display information and settings are available on the panel.
Scaler panel for the HDMI in 1 (TX)
Available settings and tools:
▪
Scaling mode
– Passthrough: the scaler is in pass-through mode.
– Forced resolution: the scaling is active, the selected value in the forced resolution option will be
applied on the video signal;
▪ Forced resolution: list of the available resolutions with refresh rate values. The selected one will be
applied on the video signal. See the available resolution in the
▪ Image position (Stretch / Fit / Center)
▪ Color space conversion (No conversion / RGB / YCbCr 4:4:4 / YCbCr 4:2:2);
▪ Color range (No conversion / Full range / Limited range);
▪ No Sync Screen (Test Pattern) settings;
Identify Stream / Identify Display
▪
▪ Reloading factory default settings for the selected port.
Resolutions of the Scaler / FRC
button;
Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3
series – Extender Application Mode – User's Manual series – Extender Application Mode – User's Manual
6.5.4. FRC - Input Side (TX/TRX Modes)
Clicking on the FRC (Frame Rate Converter) panel on the HDMI input 2 of the transmitter/transceiver opens
#scaler the properties of the Frame rate converter.
Available settings and tools:
▪
Output resolution mode
– Passthrough: the FRC is in pass-through mode.
– Forced resolution: the FRC is active, the selected value in the forced resolution option will be
applied on the video signal;
Forced resolution: list of the available resolutions with refresh rate values. The selected one will be
▪
applied on the display device. See the available resolution in the
section.
▪ Color space conversion (No conversion / RGB / YCbCr 4:4:4 / YCbCr 4:2:2);
section. ▪ Color range (No conversion / Full range / Limited range);
▪ No Sync Screen (Test Pattern)
▪ Identify Stream / Identify Display
▪ Reloading factory default settings for the selected port.
#frc #csc #colorspace #colorrange
FRC panel for the HDMI in 2 (TX)
Resolutions of the Scaler / FRC
settings;
button;
75 75