Software Control Modes - Lightware VINX-120-HDMI-ENC User Manual

   
5.SoftwareControlOptions

5.1. Software Control Modes

The VINX device can be controlled by the following ways:
▪ Using the built-in web page,
▪ Using the Lightware Device Controller (LDC) software, or
Sending LW3 commands (detailed in the
▪
Reference chapter).
Built-in web page vs. LDC
TheLDCandthebuilt-inwebpageshowsthesamecontent,but
there are some minor differences:
Function Built-in Web
MozillaFirefox,
Platform
Google Chrome
Webbrowser
Installation
needed only
Firmware upgrade

Device discovery -
ATTENTION!
IfyoupreferLDC,makesurethesoftwareisup-
to-date.IfanewVINXfirmwareisreleased,theLDCwillshow
the changes only if the program is also updated.
INFO:
However, the LDC is introduced briefly, this chapter
contains screenshots using the built-in web page.
Programmer's
LDC
Windows,
mac OS
Required
-

The Main window – displayed on a
mobile device
Appliedfirmwarepackage:v2.0.2b4 | LDCsoftware:v2.5.2b3
VINX-1x0-HDMI Extenders – User's Manual
The Main window – displayed in LDC
37