Buttons On The Push Button Panel - Dürkopp Adler 868-M Operating Instructions Manual

64

4.14 Buttons on the push button panel

Fig. 42: Buttons on the push button arm
The machine has push buttons on the machine arm which can be
used to activate specific functions while sewing.
Functions of the buttons
Button Function
Sewing backwards
The machine sews in reverse while the button is pressed.
Needle position
When this button is activated, the needle moves to a
specific position. This position is determined individually
via the parameter settings
The machine comes configured so that selecting the
button will bring the needle up.
Start bartack/end bartack
This button cancels the general setting for sewing start
and end bartacks.
If start/end bartacks are on, pressing the button skips the
next bartack. If start/ end bartacks are off, pressing the
button sews the next bartack. For the general setting
required for sewing start and end bartacks, refer to the
 Instructions for use DAC basic/classic.

p. 92.
Operating Instructions 868-M - 01.0 - 12/2020
Operation