Table of Contents
Advertisement
116
Reel stand
Fig. 78: Completing the tabletop (6)
(8) - Nut
(9) - Washer
Information
The reel stand shown belongs to a 1-needle machine. The reel
stand on 2-needle machines is fitted with a 2nd thread reel holder
with 2 additional plates for the hook thread reel.
To assemble the reel stand:
1.
Place a washer (9) onto the hole in the tabletop.
2.
Screw in a nut (8) until you reach the end of the thread (10).
3.
Insert the reel stand tube (11) through the washer (9) and into
the hole in the tabletop.
nd
4.
Slip the 2
washer (9) from the bottom onto the thread (10).
(10) - Thread
(11) - Reel stand tube
Operating Instructions 868-M - 01.0 - 12/2020
Setup
⑪
⑧
⑨
⑩
⑨
⑧
Advertisement
Table of Contents
