42
Fig. 23: Winding the hook thread (2)
(1) - Unwinding bracket
2.
Insert the hook thread from the rear to the front through the
right thread guide on the unwinding bracket (1).
Fig. 24: Winding the hook thread (3)
④
(2) - Thread guide
(3) - Thread guide
(4) - Thread guide
3.
Insert the hook thread from the rear to the front through the
thread guide (3).
4.
Insert the hook thread in a wavelike manner through the 3 right
holes of the thread guide (4): From the top into the left hole,
from the bottom into the center hole, and from the top into the
right hole.
The last hole is the hole on the far right in the thread guide (4).
③
②
⑤
(5) - Pre-tensioner
(6) - Winder
Operating Instructions 868-M - 01.0 - 12/2020
Operation
①
⑥