Table of Contents
Advertisement
30
3.
Insert the needle thread from the rear to the front through the
thread guide (2).
4.
Insert the needle thread in a wavelike manner through the left
holes of the thread guide (3): From the top left to the bottom,
from the bottom to the top and from the top to the bottom.
The needle thread must be inserted into the thread guide (3)
through three holes.
5.
Guide the needle thread clockwise around the
pre-tensioner (11).
6.
Guide the needle thread counterclockwise around the
additional tensioner (9).
7.
Guide the needle thread clockwise around the main
tensioner (10).
8.
Guide the needle thread clockwise to the thread tension
spring (7).
9.
Lift the tightening lever (8) with the needle thread.
10. Pull the needle thread under the spring tip (6).
11. Guide the needle thread under the hook (5).
12. Insert the needle thread from the bottom through the hole on
the needle thread regulator (4).
Operating Instructions 868-M - 01.0 - 12/2020
Operation
Advertisement
Table of Contents
