Thread Button Group Functions; Setting The Start Bartack - Dürkopp Adler 1767 Operating Instructions Manual

56
5.2

Thread button group functions

Using the Thread button group you can set or activate:
• Start bartack
• Multiple start bartack
• End bartack
• Multiple end bartack
• Thread cutter
• Thread clamp
• Needle position after sewing stop
• Sewing foot lift after thread cutter
• Sewing foot lift after sewing stop
• Soft start
• Speed
5.2.1

Setting the start bartack

The start bartack secures the seam at the seam beginning.
If a seam consists of backward stitches only, one speaks of single
bartacks. A seam of forward and backward stitches is called a
double bartack.
Single bartack
To set the single bartack:
1. Press.
 The LED at the lower right illuminates.
Press the B+ button from the Programming button group
2.
repeatedly until the required number of backward stitches is
reached.
You can begin sewing; press the pedal forward to pedal
position +1.
Operating Instructions 1767 - 00.0 - 12/2016
Programming