Setting The Pedal - Dürkopp Adler 868-M Operating Instructions Manual

Setup
Operating Instructions 868-M - 01.0 - 12/2020
The working height ranges between 750-900 mm, measured from
the top edge of the tabletop.
To set the working height:
1. Loosen both screws (1).
2. Set the tabletop to the desired working height.
Make sure the tabletop remains horizontal and does not tilt.
3. Tighten both screws (1).
7.9

Setting the pedal

Fig. 87: Setting the pedal
①
(1) - Screw
(2) - Pedal
The pedal (2) must be tilted to a degree that allows the user to
move the pedal forward and backward without a problem.
To set the pedal properly:
1. Loosen the screw (1).
2. Set the pedal (2) to the proper position on the cross strut (3)
( p. 117).
3. Tighten the screw (1).
② ③
(3) - Cross strut
123