Changing The Right Bobbin - Dürkopp Adler 868-M Operating Instructions Manual

Operation
Operating Instructions 868-M - 01.0 - 12/2020
4.7.1

Changing the right bobbin

Fig. 27: Changing the right bobbin
①
②
③
(1) - Hook cover
(2) - Slot
(3) - Guide
(4) - Tension spring
To change the right bobbin:
1. Pull the right hook cover (1) up by a few millimeters before
pivoting it to the right.
2. Swivel up the bobbin case retainer (6).
3. Remove the empty bobbin.
4. Insert a full bobbin:
Important
Insert the bobbin so that it moves in the opposite direction of the
hook when the thread is pulled out.
⑥
(5) - Slot
(6) - Bobbin case retainer
⑤
④
①
45