Switching On And Off The Function Of A Button - Dürkopp Adler 868-M Operating Instructions Manual

66

4.14.1 Switching on and off the function of a button

Fig. 43: Switching on and off the function of a button
①
(1) - Favorite button
(2) - Sewing backwards
(3) - Additional button (buttons L and R)
(4) - Stitch length preselection
To switch a function on and off:
Switching a function on
1. Press the desired button (1)/(2)/(3)/(4)/(5)/(6)/(7)/(8).
 The function is switched on. The pressed button lights up.
Switching a function off
1. Press the button (1)/(2)/(3)/(4)/(5)/(6)/(7)/(8) again.
 The function is switched off. The button you pressed is no
longer lit.
Information
The additional button (3) is only found on 2-needle machines with
switchable needle bars. You can use the buttons L and R to select
if the left or the right needle bar is supposed to be activated
(e.g. to sew around corners)
② ③
(5) - Auxiliary thread tension
(6) - Pneumatic seam middle guide
(7) - Start bartack/end bartack
(8) - Needle position
Operating Instructions 868-M - 01.0 - 12/2020
Operation
⑧ ⑦
④⑤ ⑥