124
7.10 Assembling the control panel
All CLASSIC machines are equipped with the OP1000 control
panel.
Fig. 88: Assembling the control panel
③
④
⑤
(1) - Mounting bracket
(2) - Control panel
(3) - Connecting cable
To assemble the control panel:
1.
Tighten the mounting bracket (1) on the machine head.
2.
Remove the cover (4).
3.
Remove the cover from the cable duct (5).
4.
Tighten the control panel (2) on the mounting bracket (1).
5.
Guide the connecting cable (3) behind covers (4) and (5) and
down through the tabletop cutout towards the control.
6.
Assemble cover (4) and cover (5).
Make sure not to damage the connecting cable (3) or the
other cables.
②
①
(4) - Cover
(5) - Cover (cable duct)
Operating Instructions 868-M - 01.0 - 12/2020
Setup