Table of Contents
Advertisement
Operation
Operating Instructions 868-M - 01.0 - 12/2020
4.20.2 Sewing with the machine
The following is an example of how to sew with one of the machines.
To complete the operating steps listed below, a CLASSIC machine
must possess the following features:
• 1-needle machine
• Thread cutter
• electropneumatic seam bar tacking and sewing foot lift
• electropneumatic quick stroke adjustment
The following functions have been set at the control panel:
Function
Start bartack:
End bartack:
Sewing foot
position before
and after cutting:
Needle position
before cutting:
Needle position
after cutting:
The last sewing process is completed with an end bartack and by
cutting off the thread.
To sew with the machine:
Preparing to sew
1.
Switch on the machine ( p. 20).
The needle is up, and the sewing feet are down. The pedal
is in position 0. The machine is ready for operation.
2.
Press the pedal back to position -1.
Lift the sewing feet.
3.
Place the sewing material at the appropriate position above
the throat plate.
Setting
ON
ON
DOWN
st
DOWN (pedal in 1
position = pedal in position 0)
nd
UP (pedal in 2
position = pedal in position -2)
83
Advertisement
Table of Contents
