Table of Contents
Advertisement
Operation
Operating Instructions 868-M - 01.0 - 12/2020
Fig. 54: Additional equipment seam middle guide (3)
(3) - Pressure gage
Increasing the contact pressure
To increase the contact pressure of the seam middle guide (1)/(2):
1.
Pull the pressure controller (4) up.
2.
Turn the pressure controller (4) clockwise until the pressure
gage (3) indicates the proper setting.
3.
Push the pressure controller (4) down.
Reducing the contact pressure
To reduce the contact pressure of the seam middle guide (1)/(2):
1.
Pull the pressure controller (4) up.
2.
Turn the pressure controller (4) counterclockwise until the
pressure gage (3) indicates the proper setting.
3.
Push the pressure controller (4) down.
(4) - Pressure controller
④
③
79
Advertisement
Table of Contents
