Setup
Operating Instructions 868-M - 01.0 - 12/2020
7.
Pull the pedal rod (7) to the correct length:
Proper setting: 10° inclination with pedal (1) released.
8.
Tighten the screw (6).
7.7
Inserting the machine head
WARNING
Risk of crushing from moving parts.
The machine head is very heavy.
Crushing possible.
Ensure that your hands are not jammed when
inserting the machine head.
NOTICE
Property damage may occur!
Cable may sustain damage and impair the operation of the
machine.
Always lay the cables so as not to create any chafing or
pinching points.
Fig. 82: Inserting the machine head (1)
(1) - Hinge
(2) - Machine head
②
①
119