Characteristics - Dürkopp Adler 868-M Operating Instructions Manual

Technical data
Operating Instructions 868-M - 01.0 - 12/2020

11.3 Characteristics

The characteristics of the machine vary with the subclass it
belongs to:
• large (L)/extra-large (XXL) vertical hook
• DAC classic control
• Control panel OP 1000
• Integrated winder
• The clearance under the sewing feet when lifted is max. 20 mm
(all subclasses, except those that do not include a thread cutter,
require a drive with reversing mechanism to allow for the
positioning of the needle above the sewing feet)
• The remaining thread length following the thread cutting
process is approx. 15 mm
• A safety snap-on coupling prevents any misadjustment of the
hook or damage to the hook in the event of a hook thread
jamming
• Automatic wick lubrication with an inspection glass housed in
the machine arm for lubricating the machine and the hook
• Except for the machines in the ECO subclass, all subclasses
come with a push button panel including 6 buttons
• A fully customizable favorite button within easy reach of
the user (possible functions are: Needle up/down, bartack
suppression, second stitch length, switchable thread tension,
and lower edge stop)
• The possible needle spacing for the vertical L hook with and
without thread cutter is 3-63 mm
• The possible needle spacing for the vertical XXL hook with
and without thread cutter is 3-56 mm
• Subclass 868-490322-M is equipped with switchable needle
bars
151