Table of Contents
Advertisement
130
7.15.1 Assembling the compressed air maintenance
unit
To assemble the compressed air maintenance unit:
1.
Connect the connection hose (Ø = 9 mm) to the compressed
air supply using a hose coupling R 1/4".
7.15.2 Setting the operating pressure
NOTICE
Property damage from incorrect setting!
Incorrect operating pressure can result in damage to the
machine.
Ensure that the machine is only used when the operating
pressure is set correctly.
Proper setting
Refer to the Technical data ( p. 149) chapter for the permissi-
ble operating pressure. The operating pressure cannot deviate by
more than ± 0.5 bar.
Fig. 95: Setting the operating pressure
①
(1) - Pressure controller
(2) - Pressure gage
Operating Instructions 868-M - 01.0 - 12/2020
Setup
②
Advertisement
Table of Contents
