Table of Contents
Advertisement
Operation
Operating Instructions 868-M - 01.0 - 12/2020
18. Insert the needle thread through the right hole of the thread
guide (16).
Important
Fig. 14: In 1-needle machines (7)
For 868-390XXX-M
19. Insert the needle thread through the thread guide of the needle
bar (17).
20. Insert the needle thread through the needle eye in such a way
that the loose thread end faces the hook.
For machines with thread cutter
21. Pull the needle thread through the needle eye until the loose
thread end has a length of approx. 4 cm with the thread lever (12)
at the highest position.
Important
Check the thread length.
If the loose thread end is too long, the needle thread may be caught
by the hook and cause a disturbance. If the loose thread end is
too short, the machine cannot start sewing.
⑱
For 868-190XXX-M
33
Advertisement
Table of Contents
