Table of Contents
Advertisement
Setup
Operating Instructions 868-M - 01.0 - 12/2020
7.4
Assembling the control
The control used for ECO machines is built into the motor cover.
CLASSIC machines require that the DAC classic control be
assembled under the tabletop.
Fig. 72: Assembling the control
①
(1) - Strain relief mechanism
(2) - Control
To assemble the control:
1.
Screw the control (2) onto the 4 screw holders (3) under the
tabletop.
2.
Clamp the power cable of the control (2) into the strain relief
mechanism (1).
3.
Screw the strain relief mechanism (1) in place under the tabletop
using 2 screws.
(3) - Screw holder
③
②
111
Advertisement
Table of Contents
