Assigning A Function To The Knee Button - Dürkopp Adler 868-M Operating Instructions Manual

Programming
Operating Instructions 868-M - 01.0 - 12/2020
5.3

Assigning a function to the knee button

Fig. 62: Assigning a function to the knee button
①
②
(1) - Toggle switch
The knee button (2) can be assigned 2 different functions.
The functions are selected in sewing mode via the position of the
toggle switch (1) (1 or 0).
Information
At the factory, the knee button was assigned the switchable sewing
foot stroke function in push-to-run and hold-to-run mode ( p. 60).
The knee button (2) can also be assigned different functions.
To assign a function to the knee button (2):
1. Press the
2. Set the toggle switch (1) to the desired position (1 or 0).
If the toggle switch (1) is, for instance, set to the bottom
position, the new function is saved to the 0 position.
(2) - Knee button
button.
93