Table of Contents
Advertisement
Operation
Operating Instructions 868-M - 01.0 - 12/2020
7.
To sew an intermediate bartack, press button (1)
OR
Push the stitch adjustment lever (4) down.
The machine will sew in reverse for as long as you keep down
the button (1) or the stitch adjustment lever (4) ( p. 72).
Afterwards, the machine keeps sewing at the speed set by
pressing the pedal.
nd
Using the 2
stitch length
nd
8.
To use the 2
button (2) ( p. 75).
9.
To switch back to the normal stitch length, press button (2)
again.
Increasing the thread tension
10. To increase the additional tension during sewing, press
button (3) ( p. 51).
11. To switch back to the normal needle thread tension, press
button (3) again.
Sewing over cross seams
Fig. 58: Sewing with the machine (3)
(5) - Knee button
12. To sew over thick places in the material such as cross seams,
activate the maximum sewing foot stroke using the knee
button (5).
Depending on whether the knee button (5) is operated in
push-to-run or hold-to-run mode, press the knee button (5)
once or press it and hold it down ( p. 60).
13. To switch the increased sewing foot stroke off, press the knee
button (5) again
OR
stop holding it down.
(maximum) stitch length during sewing, press
⑤
85
Advertisement
Table of Contents
