118
Fig. 80: Assembling the pedal and setpoint device (2)
③
④
⑤
(3) - Bracket
(4) - Setpoint device
(5) - Ball joints
3.
Screw the bracket (3) under the tabletop so that the pedal
rod (7) runs to the pedal (1) at right-angles to the setpoint
device (4).
4.
Screw the setpoint device (4) onto the bracket (3).
5.
Attach the pedal rod (7) with the ball joints (5) to the setpoint
device (4) and to the pedal (1).
6.
Slightly loosen the screw (6).
Fig. 81: Assembling the pedal and setpoint device (3)
(6) - Screw
(7) - Pedal rod
10°
①
Operating Instructions 868-M - 01.0 - 12/2020
Setup
⑦
⑥