Dürkopp Adler 868-M Operating Instructions Manual page 42

40
32. Insert the left needle thread through the left hole of the thread
guide (19).
Fig. 21: In 2-needle machines (7)
⑲
⑳
(19) - Thread guide
33. Insert the right needle thread through the right hole of the
thread guide (20).
34. Insert the left needle thread through the left hole of the thread
guide (20).
35. Insert the right needle thread through the right needle eye in
such a way that the loose thread end faces the right hook.
36. Insert the left needle thread through the left needle eye in
such a way that the loose thread end faces the left hook.
For machines with thread cutter
37. Pull each needle thread through the needle eye until the loose
thread end has a length of approx. 4 cm with the thread
lever (13) at the highest position.
Important
Check the thread length.
If the loose thread end is too long, the needle thread may be caught
by the hook and cause a disturbance. If the loose thread end is
too short, the machine cannot start sewing.
(20) - Thread guide
Operating Instructions 868-M - 01.0 - 12/2020
Operation