Table of Contents
Advertisement
126
To assemble the mechanical knee lever:
1.
Tilt the machine head.
2.
Guide the transmission rod (5) through the oil pan (1).
3.
Assemble the transmission rod (5) on the machine head using
the screw (6).
4.
Screw the rod (2) and the knee lever (3) together.
5.
Assemble the rod (2) to the transmission rod (5) using the
connecting piece (4).
6.
Erect the machine head.
The knee lever (3) automatically moves to its initial position
and is ready for operation.
7.11.2 Assembling the electric knee button
Fig. 91: Assembling the electric knee button
①
②
(1) - Knee button
(2) - Connecting cable
To assemble the electric knee button:
1.
Screw the knee button (1) in front of the oil pan firmly in place
under the tabletop.
2.
Guide the connecting cable (2) to the back between the oil
pan and the control.
3.
Insert the plug (3) of the connecting cable (2) into the socket
of the control.
(3) - Plug
Operating Instructions 868-M - 01.0 - 12/2020
Setup
③
Advertisement
Table of Contents
