Set Ssh; Set Https - HIKVISION DS-2TD2137-4/P User Manual

5. Click Save.

12.13.4 Set SSH

SSH is a protocol to ensure security of remote login. This setting is reserved for professional
maintenance personnel only.
Steps
1. Go to Configuration → System → Security → Security Service.
2. Check Enable SSH.
3. Click Save.

12.13.5 Set HTTPS

HTTPS is a network protocol that enables encrypted transmission and identity authentication,
which improves the security of remote access.
Steps
1. Go to Configuration → Network → Advanced Settings → HTTPS.
2. Check Enable.
3. Optional: Check HTTPS Browsing to access the device only via HTTPS protocol.
4. Click Delete to recreate and install certificate.
Create and install
self-signed certificate
Create certificate
request and install
certificate
5. Click Save.
Create and Install Self-signed Certificate
Steps
1. Check Create Self-signed Certificate.
2. Click Create.
3. Follow the prompt to enter Country/Region, Hostname/IP, Validity and other parameters.
4. Click OK.
Result
The device will install the self-signed certificate by default.
Thermal Network Camera User Manual
Refer to Create and Install Self-signed Certificate
Refer to Install Authorized Certificate
71