Export Diagnose Information; Reboot; Restore And Default; Upgrade - HIKVISION DS-2TD4238-7/S2 User Manual

Thermal & Optical Bi-spectrum PTZ Network Camera User Manual

13.4 Export Diagnose Information

Diagnose information includes running log, system information, hardware information.
Go to Configuration → System → Maintenance → Upgrade & Maintenance , and click Diagnose
Information to export diagnose information of the device.

13.5 Reboot

You can restart the device via browser.
Go to Configuration → System → Maintenance → Upgrade & Maintenance , and click Reboot.

13.6 Restore and Default

Restore and Default helps restore the device parameters to the default settings.
Steps
1. Go to Configuration → System → Maintenance → Upgrade & Maintenance .
2. Click Restore or Default according to your needs.
Restore Reset device parameters, except user information, IP parameters and video format
to the default settings.
Default Reset all the parameters to the factory default.
Be careful when using this function. After resetting to the factory default, all the
parameters are reset to the default settings.

13.7 Upgrade

Before You Start
You need to obtain the correct upgrade package.
Caution
DO NOT disconnect power during the process, and the device restarts automatically after upgrade.
Steps
1. Go to Configuration → System → Maintenance → Upgrade & Maintenance .
2. Choose one method to upgrade.
Firmware
Note
Locate the exact path of the upgrade file.
90