Thermal Optical Bi-spectrum Network Camera User Manual
Note
You can import the exported Device Common Parameters to devices of the same series.
4) Click Browse to select the saved configuration file.
5) Input the encryption password you have set when exporting the configuration file.
6) Click Import.
10.4 Export Diagnose Information
Diagnose information includes running log, system information, hardware information.
Go to Configuration → System → Maintenance → Upgrade & Maintenance , and click Diagnose
Information to export diagnose information of the device.
10.5 Reboot
You can restart the device via browser.
Go to Configuration → System → Maintenance → Upgrade & Maintenance , and click Reboot.
10.6 Device Auto Maintenance
Set the auto maintenance schedule and the device will automatically restart on schedule, which
helps avoid problems such as network anomaly and outage during continuous operation, etc.
Steps
1. Go to Configuration → System → Maintenance → Upgrade & Maintenance .
2. Check Enable Auto Maintenance.
3. Read the prompt information and click OK.
4. Select the date and time when the device automatically restart.
5. Click Save.
Note
This function is only available for Administrator.
10.7 Restore and Default
Restore and Default helps restore the device parameters to the default settings.
Steps
1. Go to Configuration → System → Maintenance → Upgrade & Maintenance .
2. Click Restore or Default according to your needs.
78