Table of Contents
Advertisement
Thermal Optical Bi-spectrum Network Camera User Manual
Steps
1. Click to show quick setup page.
2. Set display settings, OSD, and video/audio parameters.
- For display settings, see Display Settings .
- For OSD settings, see OSD .
- For audio and video settings, see Video and Image Settings .
Note
The function is only supported by certain models.
4.1.12 Lens Parameters Adjustment
It is used to adjust the lens focus, zoom and iris.
Zoom
Click
, and the lens zooms in.
●
Click
, and the lens zooms out.
●
Focus
Click
, then the lens focuses far and the distant object gets clear.
●
Click
, then the lens focuses near and the nearby object gets clear.
●
Iris
When the image is too dark, click
●
When the image is too bright, click
●
Note
The function is only supported by certain models.
4.2 Set Transmission Parameters
The live view image may be displayed abnormally according to the network conditions. In different
network environments, you can adjust the transmission parameters to solve the problem.
Steps
1. Go to Configuration → Local → Live View Parameters .
2. Set the transmission parameters as required.
Protocol
TCP
to enlarge the iris.
to stop down the iris.
20
Advertisement
Table of Contents
