Table of Contents
Advertisement
5.1.11 Lens Initialization
Lens initialization is used on the device equipped with motorized lens. The function can reset lens
when long time zoom or focus results in blurred image. This function varies according to different
models.
Click
to operate lens initialization.
5.1.12 Track Manually
In live view, manually select a target for the device to track.
Note
The function may not be supported by certain device models.
Steps
1. Click
on the toolbar of the live view page.
2. Click a moving object in the live image.
The device tracks the target and keeps it in the center of live view image.
5.1.13 Conduct 3D Positioning
3D positioning is to relocate the selected area to the image center.
Steps
1. Click
to enable the function.
2. Select a target area in live image.
- Left click on a point on live image: the point is relocated to the center of the live image. With
no zooming in or out effect.
- Hold and drag the mouse to a lower right position to frame an area on the live: the framed
area is zoomed in and relocated to the center of the live image.
- Hold and drag the mouse to an upper left position to frame an area on the live: the framed
area is zoomed out and relocated to the center of the live image.
3. Click the button again to turn off the function.
5.2 Set Transmission Parameters
The live view image may be displayed abnormally according to the network conditions. In different
network environments, you can adjust the transmission parameters to solve the problem.
Steps
1. Go to Configuration → Local → Live View Parameters .
2. Set the transmission parameters as required.
TandemVu PTZ Camera User Manual
33
Advertisement
Table of Contents
