Table of Contents
Advertisement
Chapter 8 Arming Schedule and Alarm Linkage
Arming schedule is a customized time period in which the device performs certain tasks. Alarm
linkage is the response to the detected certain incident or target during the scheduled time.
8.1 Set Arming Schedule
Set the valid time of the device tasks.
Steps
1. Optional: Click Arming Schedule and Linkage Method in the related event interface.
2. Click Edit behind Arming Schedule.
3. Click Draw, and drag the time bar to draw desired valid time.
Note
Each cell represents 30 minutes.
●
Move the mouse over the drawn time period to see specific time periods and fine-tune the
●
start time and end time.
Up to 8 periods can be configured for one day.
●
4. Click Erase, and drag the time bar to clear selected valid time.
5. Click OK to save the settings.
8.2 Linkage Method Settings
You can enable the linkage functions when an event or alarm occurs.
Network Speed Dome User Manual
Figure 8-1 Set Arming Schedule
61
Advertisement
Table of Contents
