Chapter 7 Arming Schedule And Alarm Linkage; Set Arming Schedule; Linkage Method Settings; Trigger Alarm Output - HIKVISION DS-2TD4668-35A4/W User Manual

Thermal & Optical Bi-spectrum PTZ Network Camera User Manual

Chapter 7 Arming Schedule and Alarm Linkage

Arming schedule is a customized time period in which the device performs certain tasks. Alarm
linkage is the response to the detected certain incident or target during the scheduled time.

7.1 Set Arming Schedule

Set the valid time of the device tasks.
Steps
1. Click Arming Schedule.
2. Drag the time bar to draw desired valid time.
Note
Up to 8 periods can be configured for one day.
3. Adjust the time period.
- Click on the selected time period, and enter the desired value. Click Save.
- Click on the selected time period. Drag the both ends to adjust the time period.
- Click on the selected time period, and drag it on the time bar.
4. Optional: Click Copy to... to copy the same settings to other days.
5. Click Save.

7.2 Linkage Method Settings

You can enable the linkage functions when an event or alarm occurs.

7.2.1 Trigger Alarm Output

If the device has been connected to an alarm output device, and the alarm output No. has been
configured, the device sends alarm information to the connected alarm output device when an
alarm is triggered.
Steps
Note
This function is only supported by certain models.
1. Go to Configuration → Event → Basic Event → Alarm Output .
2. Set alarm output parameters.
Automatic Alarm For the information about the configuration, see Automatic Alarm .
32