Lagrange Fait Maison Instruction Book page 58

FAIT MAISON_LAGRANGE 16/05/11 10:07 Page59
Executing a programme
• Close the cover and connect the appliance to the mains. If the trough
is incorrectly positioned, the LCD screen will display the following sym-
bol: , which will flash when the "Start/stop" button is pressed. You
must then properly set the trough to be able to launch the programme.
• Select the suitable trough, i.e. the bread trough.
?
• Select the programme for the bread that you wish to prepare by suc-
à placer au fil de la notice (voir Doc Word)
cessively pressing the programme selection button.
• Select the gilding from among the 3 possible choices by successively
pressing the gilding/temperature selection button. By default, the tem-
perature arrow is on the "medium" position. This button is inactive for
the "jam, kneading, pastry, pizza dough" programmes.
• Select the size of the bread (700 or 900g) that you want using the
weight selection button. By default, the arrow is on the "900g" position.
This button is inactive for the "gâteau, cake, pastry, pizza dough, knea-
ding, jam, baking" programmes.
• Programme the duration according to the time when you want your
bread to be ready (optional). (Cf. "Deferred" paragraph page 54).
• Press the "start/stop" button to launch the programme. The ":" symbol
starts flashing.
Pantone Warm Gray 6 C
Yeast
Sugar, salt and flour
Liquid or humid ingredients
cc cs
Teaspoon
Tablespoon
placer dans l'anglais
Levure
Sucre, sel, farine
ingrédients liquides/humides
cc cs
ne pas réduire davantage
17 Chemin de la Plaine
ZA les Plattes
69390 VOURLES
• For the "basic bread, whole-wheat bread, French bread, quick, and
France
www.lagrange.fr
sweet bread" programmes, an audible signal will sound 10 times during
the process (Cf. " Guide of cycle per programme " table page 46). This
allows you to add ingredients, according to your taste. You can then
open the cover of the appliance to add ingredients (dry fruits, choco-
late chips, seeds, walnuts, etc.).
• CAUTION: Steam may escape when the cover is opened.
• Once the programme is complete, an audible signal will sound 10
times. You can then press the "start/stop" button to stop the program-
me.
If you are not in the room or if you do not press the start/stop button,
the warming cycle will automatically start for 60 minutes.
57