Connection Of Auxiliary Devices - GE LOGIQ P9 Service Manual

GEDRAFT
D 5604324, R
IRECTION EVISION
Section 3-6

Connection of Auxiliary Devices

NOTE: Normally auxiliary devices and peripherals come pre-installed with the system.
Table 3-7
Table 3-7
Sub-section
3-6-1
3-6-2
3-6-3
3-6-3
3-6-4
3-6-5
3-6-6
3-6-7
After each installation, the leakage currents have to be measured according to
WARNING WARNING
IEC 60601-1 respectively ANSI/AAMI ES60601-1.
!! WARNING:
Please observe that some printers may not be medical devices! If the Bluetooth Printer and/or
CAUTION
Line Printers are not medical devices, they have to be located outside of the patient
!! CAUTION:
environment (according to IEC 60601-1 / ANSI/AAMI ES60601-1).
NOTE: For more detailed Safety Considerations when connecting auxiliary devices to the LOGIQ P9/P7
system, please review:
11 DRAFT (J
below outlines hardware installation procedures described in the sub-sections.
Connection Procedures
Connecting the LCD Monitor
Connecting the Black & White Printer
Connecting the Color Printer
Connecting the Secondary "Patient" LCD Monitor
Connecting the Footswitch
Connecting the USB Flash Memory Stick
Connecting the external USB Hard disk (Handydrive)
General Remarks and Hints when using external USB-Devices
1,5 m 1,5 m
Chapter 1 - Auxiliary Devices Safety, on page
Chapter 3 - Setup Instructions
24, 2019)
ANUARY
Description
2,5 m
LOGIQ P9/P7
S M
ERVICE
Page Number
3-12
3-13
3-14
3-15
3-17
3-18
3-18
3-19
1,5 m
1-10.
ANUAL
3-11