GE
DRAFT
DIRECTION 5775469, R
Section 3-5
Connection of Auxiliary Devices
NOTE:
Normally auxiliary devices and peripherals come pre-installed with the system.
Table 3-7
Table 3-7
Sub-section
3-5-1
3-5-2
3-5-3
3-5-4
3-5-5
3-5-6
3-5-7
3-5-8
3-5-9
After each installation, the leakage currents have to be measured according to
WARNING
WARNING
IEC 60601-1 respectively UL 60601-1 and ANSI/AAMI ES60601-1.
!! WARNING:
Please observe that some printers may not be medical devices! If the Bluetooth Printer and/or
CAUTION
Line Printers are not medical devices, they have to be located outside of the patient
!! CAUTION:
environment and use separation device such as LAN/USB isolator or isolation transformer
(according to IEC 60601-1 / UL 60601-1 and ANSI/AAMI ES60601-1).
NOTE:
For more detailed Safety Considerations when connecting auxiliary devices to the Voluson™ P8/
Voluson™P6 system, please review:
3
DRAFT (J
EVISION
below outlines hardware installation procedures described in the sub-sections.
Connection Procedures
Connecting the LCD Monitor
Connecting the Black & White Printer
Connecting the Color Printer
Connecting the DeskJet Color Printer
Connecting the Wireless Network Adapter
Connecting the Footswitch
Connecting the USB Flash Memory Stick
Connecting the external USB Hard disk (Handydrive)
General Remarks and Hints when using external USB-Devices
1,5 m
1,5 m
Chapter 3 - Setup Instructions
19, 2018)
ULY
Description
2,5 m
Chapter 1 - Auxiliary Devices Safety, on page
V
™ P8/V
OLUSON
OLUSON
B
S
M
ASIC
ERVICE
Page Number
3-12
3-13
3-15
3-17
3-19
3-20
3-21
3-21
3-22
1,5 m
1-8.
™P6
ANUAL
3-11